Pedal HQ

Grips

Sort by

Grips

Deity Components Knuckleduster Grips

Grips
PHP 1,350.00
PHP 1,450.00
The benchmark in grip design DIRT MAG Top 100 Product for 2018! Featuring DEITY TRC rubber compound for exceptional durability Tapered inner sleeve to insure perfect contact with the handlebar Single clamp design with forward facing bolts that feature loc-tite Lasered black ano 6061 T6 aluminum clamps Short and wide rib design for added comfort with no side to side play Half waffle recessed design for added control without hot spots Chevron v-channel design for your palm swell to give an ergonomic feel Seamless transition through the end of grip for comfort 132mm length with 32mm outer diameter Intended use: All MTN / Enduro / DJ / Slopestyle and DH Full color range available in Black, Stealth, Red, Green, Blue, Orange, Turq, Gum, Pink, Purple, Shaolin Yellow, and Mint 101 grams for the set​ INSTALLATION TIP: To fully and properly install your KNUCKLEDUSTER grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar. If you find the fit is a bit tight due to your particular handlebar, a small amount of Isopropyl Alcohol can work wonders for lubrication. Finish the install by tightening the hardware to the specs listed on the packaging. VITAL MTB REVIEW - 4.5/5

Deity Components Knuckleduster Grips (copy)

Grips
PHP 1,350.00
PHP 1,450.00
The benchmark in grip design DIRT MAG Top 100 Product for 2018! Featuring DEITY TRC rubber compound for exceptional durability Tapered inner sleeve to insure perfect contact with the handlebar Single clamp design with forward facing bolts that feature loc-tite Lasered black ano 6061 T6 aluminum clamps Short and wide rib design for added comfort with no side to side play Half waffle recessed design for added control without hot spots Chevron v-channel design for your palm swell to give an ergonomic feel Seamless transition through the end of grip for comfort 132mm length with 32mm outer diameter Intended use: All MTN / Enduro / DJ / Slopestyle and DH Full color range available in Black, Stealth, Red, Green, Blue, Orange, Turq, Gum, Pink, Purple, Shaolin Yellow, and Mint 101 grams for the set​ INSTALLATION TIP: To fully and properly install your KNUCKLEDUSTER grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar. If you find the fit is a bit tight due to your particular handlebar, a small amount of Isopropyl Alcohol can work wonders for lubrication. Finish the install by tightening the hardware to the specs listed on the packaging. VITAL MTB REVIEW - 4.5/5

Momum GeraGrip #1 (5mm)

Grips
PHP 1,000.00
PHP 1,100.00
Momum GeraGrip #1 (5mm) Description The GERAGRIP range live up to their name, the expression ‘get a grip’, take control. 3 grips, 3 preferences. #1 is the choice of those looking for performance and lightness with its 16gr for the complete set, while Shaggy and Balboa are the choice of 32mm and 34mm of those who prioritize the comfort of silicone foam. Model #1 is made in a single piece of super light foam that does not need plugs. The leitmotiv of this range is clearer in # 1 than in any other model: its generous 135mm are balanced by a diameter of 30mm that delivers a very direct feel on the handlebar, enhanced by a great grip and a weight around 16gr (+-5%) that has no rival. Control, touch and lightness, lots of lightness. Proud sponsors of the MMR Factory Racing Team and Buff-Scott MTB Team. Super light foam Single piece body; no plugs needed Maximum feel Great grip Laser engraved 135mm long 30mm diameter Pro racer’s choice

Momum GeraGrip Balboa (8mm)

Grips
PHP 1,200.00
PHP 1,300.00
Momum GeraGrip Balboa (8mm) Grips Balboa is a grip made of 100% silicone foam. With its 34mm thickness, this creation is focused on bikers with big hands and looking for more shock absorption, being the perfect partner of our Shaggy (32mm) model. The GERAGRIP range live up to their name, the expression ‘get a grip’, take control. 3 grips, 3 preferences. #1 is the choice of those looking for performance and lightness with its 16gr for the complete set, while Shaggy and Balboa are the choice of 32mm and 34mm of those who prioritize the comfort of silicone foam. Balboa is a grip made of 100% silicone foam. With its 34mm thickness, this creation is focused on bikers with big hands and looking for more shock absorption, being the perfect partner of our Shaggy (32mm) model. 100% Silicone foam body Great grip High shock absorption Long durability 34mm diameter 130mm long 1 set of plugs included Available in 5 colours

Momum GeraGrip Shaggy (6.5mm)

Grips
PHP 1,100.00
PHP 1,200.00
Momum GeraGrip Shaggy (6.5mm) Shaggy are the thinnest grips that we manufacture in 100% silicone foam. With its 32mm of diameter, this model seeks a great balance between a close feel to the handlebar and a good absorption of ground impacts and vibrations. Shaggy’s grip and durability is identical to his thicker brother, Balboa. 100% Silicone foam body Great grip High shock absorption Long durabibility 32mm diameter 130mm long 1 set of plugs included Available in 5 colours

OneUp Components Grips

Grips
PHP 1,350.00
OneUp Components Grips A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS Weight: 97g (Pair) Length: 136mm Diameter: 30mm Colours: Black, Red, Green, Blue, Orange & Purple
Create a website like this in 5 minutes with
Kyte