OneUp Components Round Chainring - 104BCD OneUp your complete drivetrain with our new Narrow Wide Chainrings. - Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit - Perfect chainline with 2mm Shims included with 32T and 34T rings (30T rings have built in offset). For a quieter drivetrain with improved chain wear and best drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from hard wearing 7075-T6 aluminum plate - 30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible on a 104 BCD crank (loose shims are only included with the 32T-36T sizes). *Shims - Included with 32T and 34T rings. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware - No new bolt packs required! SPEC Material: 7075-T6 Chainline Explained Weight: 40g (30T), 44g (32T), 54g (34T), 2g (4x shims) Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed XTR Chains) Colors: Black, Green

OneUp Components Round Chainring - 104BCD OneUp your complete drivetrain with our new Narrow Wide Chainrings. - Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit - Perfect chainline with 2mm Shims included with 32T and 34T rings (30T rings have built in offset). For a quieter drivetrain with improved chain wear and best drop performance. - Reuse your existing 8-10mm long ring hardware. No new bolt packs required. - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from hard wearing 7075-T6 aluminum plate - 30T rings have integrated shims and chainring bolt threads to allow the smallest ring size possible on a 104 BCD crank (loose shims are only included with the 32T-36T sizes). *Shims - Included with 32T and 34T rings. For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline. For 3x crank conversions, shims under the bolt heads allow reuse of your 3x hardware - No new bolt packs required! SPEC Material: 7075-T6 Chainline Explained Weight: 40g (30T), 44g (32T), 54g (34T), 2g (4x shims) Compatible with: 9, 10, 11 and 12 Speed SRAM Chains and 104 BCD cranks (not compatible with 12 Speed XTR Chains) Colors: Black, Green

Unite Components ● 𝗢𝗩𝗔𝗟 𝗖𝗛𝗔𝗜𝗡𝗥𝗜𝗡𝗚𝗦 ● 104 BCD - 30T | 32T | 3T >Our new oval rings share all of the great features that the standard Grip Ring has to oer but with an oval profile. Our oval design has many advantages over our standard round rings: - Improves traction while climbing - Reduces knee pain - 12% ovality (32T is equal to 30T-34T range) - 115° Clocking from crank arm puts the major axis in your power stroke Our new Oval Grip Rings oer excellent chain retention, great mud clearance and longevity, with a very high-quality finish. Grip Rings are CNC machined from 7075 aluminium, one of the hardest grades of aluminium available. A large amount of wear occurs on the front face of many chain rings due to the extreme chain-line caused by 1x set-ups, our extra wide alternating tooth profile improves both durability and retention over a longer period. As chains begin to stretch they start to bind in certain places, damaging the chain and ring. Our Grip Rings have specially machined recesses, which help to prevent this damage, increasing the longevity of the chain ring and chain. Grip Rings utilise a stiff and light design that is efficient and offers excellent protection from rock strikes. * * * ■ Features: - Alternating chain profile prevents chain drop - Wide tooth profile for extra retention - Recessed for improved mud clearance and Improved chain ring life - CNC machined from hard wearing 7075-T6 aluminium - Weight - from 40g - Available sizes: 30T, 32T, 34T, 36T - 12% ovality - 115° Clocking from crank arm 104BCD (30T, 32T, 34T)

Unite Components ● 𝗢𝗩𝗔𝗟 𝗖𝗛𝗔𝗜𝗡𝗥𝗜𝗡𝗚𝗦 ● RaceFace Cinch - 30T | 32T | 3T >Our new oval rings share all of the great features that the standard Grip Ring has to oer but with an oval profile. Our oval design has many advantages over our standard round rings: - Improves traction while climbing - Reduces knee pain - 12% ovality (32T is equal to 30T-34T range) - 115° Clocking from crank arm puts the major axis in your power stroke Our new Oval Grip Rings oer excellent chain retention, great mud clearance and longevity, with a very high-quality finish. Grip Rings are CNC machined from 7075 aluminium, one of the hardest grades of aluminium available. A large amount of wear occurs on the front face of many chain rings due to the extreme chain-line caused by 1x set-ups, our extra wide alternating tooth profile improves both durability and retention over a longer period. As chains begin to stretch they start to bind in certain places, damaging the chain and ring. Our Grip Rings have specially machined recesses, which help to prevent this damage, increasing the longevity of the chain ring and chain. Grip Rings utilise a stiff and light design that is efficient and offers excellent protection from rock strikes. * * * ■ Features: - Alternating chain profile prevents chain drop - Wide tooth profile for extra retention - Recessed for improved mud clearance and Improved chain ring life - CNC machined from hard wearing 7075-T6 aluminium - Weight - from 40g - Available sizes: 30T, 32T, 34T, 36T - 12% ovality - 115° Clocking from crank arm Race Face Cinch (30T, 32T, 34T)

Unite Components ● 𝗢𝗩𝗔𝗟 𝗖𝗛𝗔𝗜𝗡𝗥𝗜𝗡𝗚𝗦 ● Shimano XTM800 - 30T | 32T | 3T >Our new oval rings share all of the great features that the standard Grip Ring has to oer but with an oval profile. Our oval design has many advantages over our standard round rings: - Improves traction while climbing - Reduces knee pain - 12% ovality (32T is equal to 30T-34T range) - 115° Clocking from crank arm puts the major axis in your power stroke Our new Oval Grip Rings oer excellent chain retention, great mud clearance and longevity, with a very high-quality finish. Grip Rings are CNC machined from 7075 aluminium, one of the hardest grades of aluminium available. A large amount of wear occurs on the front face of many chain rings due to the extreme chain-line caused by 1x set-ups, our extra wide alternating tooth profile improves both durability and retention over a longer period. As chains begin to stretch they start to bind in certain places, damaging the chain and ring. Our Grip Rings have specially machined recesses, which help to prevent this damage, increasing the longevity of the chain ring and chain. Grip Rings utilise a stiff and light design that is efficient and offers excellent protection from rock strikes. * * * ■ Features: - Alternating chain profile prevents chain drop - Wide tooth profile for extra retention - Recessed for improved mud clearance and Improved chain ring life - CNC machined from hard wearing 7075-T6 aluminium - Weight - from 40g - Available sizes: 30T, 32T, 34T, 36T - 12% ovality - 115° Clocking from crank arm Shimano XTM8000 (30T, 32T, 34T)

Unite Components ● 𝗢𝗩𝗔𝗟 𝗖𝗛𝗔𝗜𝗡𝗥𝗜𝗡𝗚𝗦 ● SRAM Direct Mount Boost - 30T | 32T | 3T >Our new oval rings share all of the great features that the standard Grip Ring has to oer but with an oval profile. Our oval design has many advantages over our standard round rings: - Improves traction while climbing - Reduces knee pain - 12% ovality (32T is equal to 30T-34T range) - 115° Clocking from crank arm puts the major axis in your power stroke Our new Oval Grip Rings oer excellent chain retention, great mud clearance and longevity, with a very high-quality finish. Grip Rings are CNC machined from 7075 aluminium, one of the hardest grades of aluminium available. A large amount of wear occurs on the front face of many chain rings due to the extreme chain-line caused by 1x set-ups, our extra wide alternating tooth profile improves both durability and retention over a longer period. As chains begin to stretch they start to bind in certain places, damaging the chain and ring. Our Grip Rings have specially machined recesses, which help to prevent this damage, increasing the longevity of the chain ring and chain. Grip Rings utilise a stiff and light design that is efficient and offers excellent protection from rock strikes. * * * ■ Features: - Alternating chain profile prevents chain drop - Wide tooth profile for extra retention - Recessed for improved mud clearance and Improved chain ring life - CNC machined from hard wearing 7075-T6 aluminium - Weight - from 40g - Available sizes: 30T, 32T, 34T, 36T - 12% ovality - 115° Clocking from crank arm SRAM Direct Mount Boost (30T, 32T, 34T)

Unite Components ● 𝗥𝗢𝗨𝗡𝗗 𝗖𝗛𝗔𝗜𝗡𝗥𝗜𝗡𝗚𝗦 ● 104BCD Our new Grip Rings offer excellent chain retention, great mud clearance and longevity, with a very high-quality finish. Grip Rings are CNC machined from 7075 aluminium, one of the hardest grades of aluminium available. A large amount of wear occurs on the front face of many chain rings due to the extreme chain-line caused by 1x set-ups. Our extra wide alternating tooth profile improves both durability and retention for a longer period. As chains begin to stretch they start to bind in certain places, damaging the chain and ring. Our Grip Rings have specially machined recesses, which help to prevent this damage, increasing the longevity of the chain ring and chain. They utilise a stiffand light design that is efficient and offers excellent protection from rock strikes. * * * ■ Features: Alternating chain profile prevents chain drop - Wide tooth profile for extra retention - Recessed for improved mud clearance and Improved chain ring life - CNC machined from hard wearing 7075-T6 Aluminium - Weight - from 40g - Available sizes: 30T, 32T, 34T, 36T - Fitments available: 104 bcd, 94/96 bcd (SRAM), XTM8000 104BCD (30T, 32T, 34T)

Unite Components ● 𝗥𝗢𝗨𝗡𝗗 𝗖𝗛𝗔𝗜𝗡𝗥𝗜𝗡𝗚𝗦 ● RaceFace Cinch Our new Grip Rings offer excellent chain retention, great mud clearance and longevity, with a very high-quality finish. Grip Rings are CNC machined from 7075 aluminium, one of the hardest grades of aluminium available. A large amount of wear occurs on the front face of many chain rings due to the extreme chain-line caused by 1x set-ups. Our extra wide alternating tooth profile improves both durability and retention for a longer period. As chains begin to stretch they start to bind in certain places, damaging the chain and ring. Our Grip Rings have specially machined recesses, which help to prevent this damage, increasing the longevity of the chain ring and chain. They utilise a stiffand light design that is efficient and offers excellent protection from rock strikes. * * * ■ Features: Alternating chain profile prevents chain drop - Wide tooth profile for extra retention - Recessed for improved mud clearance and Improved chain ring life - CNC machined from hard wearing 7075-T6 Aluminium - Weight - from 40g - Available sizes: 30T, 32T, 34T, 36T - Fitments available: 104 bcd, 94/96 bcd (SRAM), XTM8000 RaceFace Cinch (30T, 32T, 34T)

Unite Components ● 𝗥𝗢𝗨𝗡𝗗 𝗖𝗛𝗔𝗜𝗡𝗥𝗜𝗡𝗚𝗦 ● Shimano XTM8000 Our new Grip Rings offer excellent chain retention, great mud clearance and longevity, with a very high-quality finish. Grip Rings are CNC machined from 7075 aluminium, one of the hardest grades of aluminium available. A large amount of wear occurs on the front face of many chain rings due to the extreme chain-line caused by 1x set-ups. Our extra wide alternating tooth profile improves both durability and retention for a longer period. As chains begin to stretch they start to bind in certain places, damaging the chain and ring. Our Grip Rings have specially machined recesses, which help to prevent this damage, increasing the longevity of the chain ring and chain. They utilise a stiffand light design that is efficient and offers excellent protection from rock strikes. * * * ■ Features: Alternating chain profile prevents chain drop - Wide tooth profile for extra retention - Recessed for improved mud clearance and Improved chain ring life - CNC machined from hard wearing 7075-T6 Aluminium - Weight - from 40g - Available sizes: 30T, 32T, 34T, 36T - Fitments available: 104 bcd, 94/96 bcd (SRAM), XTM8000 Shimano XTM8000 (30T, 32T, 34T)